Today we will review a new success story in the use of decorative wood panels for offices. Current office design faces two major challenges: the practical use of the facilities and the aesthetics it offers to visitors and the people who work there. In terms of visual appearance, office design always looks for warm elements, such as wood, that convey harmony and serenity. That is why the use of decorative wood slatted cladding, such as the ones in this project, is becoming more and more widespread. The following images correspond to a coworking office project in the centre of Paris, for which we were asked to manufacture two different models of wood cladding: Spigoplank 01 decorative wood panels in solid oak, used on the walls of some common areas such as the lift area. The model is very quick and easy to install, with a three-dimensional longitudinal surface in the form of 10-mm-thick wood slats and 10 mm spacing between slats. See technical shee Spigoline Grid 6-30-35-30 wood slat cladding in PSM R12354 stain, used in the ceilings of the main working areas. Fully assembled panel with 6 parallel solid ayous wood slats, each slat section 30x35 mm, spaced at 30 mm, joined with beech rods 12 mm diameter, panel open area 48,00 % or greater, panel mass per sqm 7,03 kg/m² or lower”. See technical sheet If you liked this post about decorative wood panels for offices, you may also be interested in: . - 21 Articles on acoustic conditioning and insulation with wood - Ecological panels with SPIGOLINE PET slats: Solid slats or MDF slats? - Restaurant décor: the 3 mistakes you can’t make in 2024 - The importance of acoustics in coliving or cohousing