Skip to main content
Imagen de spigoacustic


SPIGO GROUP | Spigoacustic - Paneles acústicos en Madera
The most effective acoustic conditioning.
Different combinations, finishes and installation systems
Aesthetics adaptable to space and decorative style
Easy assembly and maintenance
Highest capacity sound-absorbing system


SPIGO GROUP | Soluciones en madera | Spigoacustic


Our Spigoacustic system offers a wide range of acoustic panel models with different sound absorption capacities for full adaptation to the sound absorption and aesthetic requirements of each venue.
Thanks to different combinations in their face side and their circular holes besides a sound-absorbent black veil, thermically attached to the back side, Spigogroup is capable to offer a wide and varied range of high quality models with different choices and possibilities. Such as decorative models (without rear perforations) or curved panels according project.
This adaptability allows us to offer decorative models without rear circular perforations or curved panels according to the project.

Below you can download the sheets of the different models

See files
See files
See files
See files
Note: For other finishes, refer to
Imagen de spigoacustic
¿Cómo interpretar los paneles?

When chooding Spigoacustic panels, it is important to understand well the nomenclature which Spigogroup uses to identify each model. Therefore, through the following guide, Spigogroup tries to explain easily how to interpret them:

Standard measurements


  • Concealed Form T-15: 1200×300 mm.
  • Semiexposed Form T-15/T-24: 1200×300 mm.
  • Concealed Form T-24 + grapa: 1200×300 mm.

Wall Covering (Male-female joint)

  • 1200×300 mm.
  • 2400×300 mm.
Installation machining

Accesorios de instalación que opcionalmente puede suministrar Spigo: (* resto de accesorios son comercialmente estandarizados)

Areas of application
  • Concert Halls
  • Auditorium
  • Theatres
  • Conference Halls
  • Offices
  • Classrooms
  • Nurseries
  • Recording studio
  • Churches
  • Public buildings
  • Airports
  • Hotels
  • Universities
  • Shopping centres
  • Cultural centres
  • Cinemas
  • Hospitals
  • Restaurants
  • Banks
  • Radio studio
  • Libraries
  • TV studio
Curvature of panels

We put at your disposal the possibility to curve the Spigoacustic panels. (Minimum Radio 4 meters)

Projects spigoacustic

Questions frequent

What are acoustic panels

We call acoustic panels to those panels that incorporate sound-absorbing material, used in acoustic conditioning and reverberation control of a room. They are usually installed as part of the walls or ceilings of the space we want to improve acoustically.

Wood is a rigid, non-porous material that acts as a sound reflector. To maintain the warm appearance of wood, but achieve high sound absorption, our acoustic panels have slots and perforations in different openings, shapes, and sizes. Behind our panels, a sound absorbing material, such as rock wool, must be added. Depending on the area and dimensions of the perforations, the type of rock wool, and the free space that is foreseen in the installation, the whole assembly will offer a greater or lesser degree of acoustic absorption. And depending on the reverberation time that we need for the room, and the surface that we can treat with acoustic panels, we will choose acoustic panels with a greater or lesser acoustic absorption capacity.

What sound absorption do Spigoacustic panels offer?

No wooden panel, perforated or not, has sound absorption on its own: it is required to incorporate a sound-absorbing material (such as rock wool).

The technical data sheets of the Spigoacustic range show the sound absorption to be expected from the assembly once installed, including rock wool and a plenum (void space), according to the UNE-EN ISO 354 test standard, in its E100 configuration (100 mm plenum with 40 mm thick rock wool, density 70 kg/m3), simplified according to ISO EN-11654 to obtain the average absorption αω (sometimes called aw) and the practical absorptions αp (or ap). With these parameters, and knowing the surface and geometry of the room, a professional architect or interior designer can calculate the expected reverberation time for the room. We can also provide the sound absorption parameters in other configurations: if the project involves someone with expertise in architectural acoustics, please do not hesitate to contact us.

What finishes are available?

The Spigoacustic range offers great versatility in its final appearance and can be used in contemporary or classic design languages. We can choose from standard or custom melamine finishes, natural varnished wood veneers (beech, oak, cherry, walnut, maple…), prefabricated varnished woods, matte solid color lacquers from RAL, PANTONE or NSC charts, or HPL laminate outer surfaces. If your project requires a made-to-measure finish, for orders over 180 sqm, we may also be able to offer you a solution: do not hesitate to contact us.

Where to install acoustic panels

Wooden acoustic panels are installed as ceiling or wall cladding in any room or building where it is important to be able to understand the human voice. It is common to find them in cinemas, theatres, or auditoriums. Also in educational centers, such as universities, schools, or high schools, where clarity and acoustic clarity is essential for classes to be understood perfectly. The same applies to offices, meeting rooms, offices, or medical rooms, where poor acoustics can seriously impair the intelligibility of conversations. They are also used in cultural buildings such as museums or exhibition halls, and in commercial buildings and hospitality establishments such as hotels, bars, and restaurants: the lack of acoustic absorption creates a noisier and more unpleasant environment, which reduces acoustic comfort and the perceived comfort of the room. Studies have linked low acoustic comfort to shorter stay times in the sales room or in restaurants, which can be detrimental to the sales of a retail or hospitality outlet that does not have adequate acoustic response.

What are the advantages of acoustic panels?

The advantages of acoustic panels are many, but the most important is that they guarantee a good acoustic conditioning in the room where they are installed, because they manage to reduce excessive reverberation times that are so annoying for a good acoustic comfort. Reverberation is the permanence of sound beyond what it should for a correct hearing and understanding of the message, caused by the bouncing of sound waves on hard, non-absorbent surfaces. Explained in a more technical way, the “reverberation time” (T60) is a measure of the time that required for the sound to “fade away” in an enclosed area and decrease by 60 dB, once the source of the sound emission has stopped.

In addition to acoustic improvements, wooden acoustic panels offer clear aesthetic benefits. In addition to the many finishes available, the material itself is elegant and highly valued in decoration and interior design because it is very warm and helps to convey feelings of comfort. From the point of view of respect for the environment, acoustic panels are an ecological solution when they use wood certified with PEFC or FSC seals, which guarantee that they come from sustainably managed forests. These certifications also ensure that a product has been produced by a manufacturer that also guarantees the maintenance of a PEFC or FSC Chain of Custody System that reaches the final product.

Our acoustic panels are not useful towards isolation or soundproofing

Our acoustic panels are useful for acoustic conditioning because, together with a sound-absorbing material, they reduce the reverberation time of the room. Our panels have no influence on the transmission of sound, either from one room to the next, from a room to the outside (emission), or from the outside to the inside of the room (immission). If the aim of your project is insulation or soundproofing, to prevent the transmission of noise, unfortunately our panels will not be able to help you, and we recommend that you turn to companies that specialise in acoustic insulation.

I would like a price list or a quotation

As with any material, the cost of installing acoustic panels depends both on the quantity, quality and finish of the material chosen and the difficulty of the project where they are to be installed.

If you are a professional, to get a quote for our materials you can use Spigogroup’s online quotation tool. This service consists of a complete form with which you can request a quote for any of Spigogroup’s products: Spigoacustic acoustic panels, Spigotec false ceilings, Spigoline wooden slatted cladding, Spigocompac phenolic sports furniture or Spigoplank decorative panels. The tool requests, step by step, all the necessary information to complete the request and, at the end of the process, sends all the data to our sales department, which will prepare and send, in an agile way, the requested budget.

This quote will only include our materials and optional transport to the installation site. For the final price including installation, we recommend that you consult with your usual installers, or contact us to guide you in the next steps.


SPIGO GROUP Soluciones en madera - SP Blanco


We stand up to every challenge, more than 500 projects a year guarantee our success


FIEBDC / BC3 technical catalog, in PRESTO and PRESTO on-line format


Catalogues, datasheets, and the tech documents you may need.


A detailed quote in less than 48 hours.