A year ago, Spigoline, the Spigogroup solid wood slat cladding brand, launched a line of PET decorative wood slats. Since then, we have been continuously receiving orders and inquiries. Our architect and decorator clients highlight, above all, these six reasons to install this new wood slat cladding in their projects: 1.- Solid wood: Our PET decorative wood slats are made of solid Ayous wood. This means that, as it is solid wood and not post-finished chipboard or wood fibre panels, Spigoline PET System cladding has the same appearance on all sides of the slat. 2.- Lightweight: By opting for Ayous wood, you considerably reduce the weight of each panel and, therefore, the total cladding to be installed on walls and/or ceilings. 3.- Easy installation: They are quick and easy to install, cleanly and easily, and do not require special materials or tools. In addition, Ayous wood is low density, which makes them very easy to manipulate during assembly. 4.- Eco-friendly black felt: the back felt used in the panels PET decorative wood slats is made with 80% recycled polyester fibres, is 100% recyclable, boasts a very low carbon footprint and offers B-s1, d0 fire rating. In addition to black, you can choose other colours upon request. 5.- Insulation and conditioning: It combines thermal insulation and acoustic conditioning in the same product. 6.- Easy maintenance: it is very easy to clean. Dust can be removed with a simple duster and, for light stains, it is sufficient to apply a little sparkling water and carefully rub the surface. If you liked this post about PET decorative wood slats, you may also be interested in: - 21 Articles on acoustic conditioning and insulation with wood - Ecological panels with SPIGOLINE PET slats: Solid slats or MDF slats? - Restaurant décor: the 3 mistakes you can’t make in 2024 - The importance of acoustics in coliving or cohousing
Today we will review another new example of cladding with decorative wood slats for offices, both for acoustic conditioning and aesthetic reasons. A few years ago, Montepino, one of the largest owners, promoters and operators of logistics real estate in Spain, carried out a comprehensive renovation of the facilities at its headquarters in Zaragoza. Committed to the well-being of both clients and employees, they did not hesitate to take advantage of the opportunity to install solid wood lath cladding for optimal acoustic conditioning of main work areas. The Spigoline cladding system based on decorative wood slats offered the solutions they needed: 25 m² of Spigoline GRID system wood slat cladding, models 4-30-70-55 and 4-30-35-55 with white tinted finish and standard varnish. Fully assembled panel with 4 parallel solid ayous wood slats, each slat section 30x35 mm, spaced at 55 mm, joined with beech rods 12 mm diameter, panel open area 62,12 % or greater, panel mass per sqm 5,04 kg/m² or lower” 30 m² of Spigoline SOLID system wood slat cladding, model R-8_20_70_55 with PSM R12349 finish. This sound-absorbent, wood slat ceiling, forms grilles of solid Ayous wood laths with a cross-section of 20x50 mm and 70 mm high, placed parallel to each other, with a 55 mm gap between laths, which are nailed to the black-painted top board. For the entrance area, we also manufactured loose Ayous wood laths with a 30x35 m section, tinted and varnished according to the project requirements. If you liked this post about decorative wood slats for offices, you may also be interested in: . - Acoustic panels for exhibition halls, museums and galleries - How wood panels help to achieve VERDE certification - Flexible wood slat cladding: so acoustics does not limit creativity - 3 examples of interior wood cladding for health centres or hospitals