Skip to main content
SPIGO GROUP Soluciones en madera - Línea plank Spigoplank

spigoplank

By
OUR MOST SOPHISTICATED AND SEDUCTIVE COLLECTION. BORN FROM TECHNOLOGICAL KNOWLEDGE AND PASSION FOR DECORATION MULTIPLE OPTIONS ACCORDING TO APPLICATIONOPTIMAL ACOUSTIC PERFORMANCEFIREPROOF MDF AVAILABLEVERY VERSATILEIN FALSE CEILING AND WALLALL FINISHES spigoplank DECORATIVE PANELS IN WOOD A collection for true lovers of solid wood, where this noble material takes center stage, achieving a perfect hegemony between its warmth, volumetric shapes and three-dimensional surfaces capable of creating unique solutions with a reflective and diffuser effect that complement the overall conditioning of Spigo panels. Below you can download the sheets of the different models MOD-PLAIN See files MOD-01 See files MOD-02 See files MOD-03 See files MOD-04 See files MOD-05 See files MOD-06 See files MOD-07 See files MOD-08 See files SPIGOPLANK FEATURES Finishes Spigoplank decorative wooden panels will be manufactured as standard in AYOUS NATURAL, and can be applied: Ayous + Tinted to choose (Beech, Oak, Cherry, Maple, Wenge). Ayous + LacqueredRAL/NCR. Note: other solid wood finishes, consult. Standard measurements Standard length: 1500/3000 Note: other measurements of decorative wooden panels, consult depending on the project. Varnish and fireproofing treatments Installation WOODEN RASTREL + POINT The wooden batten system allows the panels to be placed using spikes nailed to the batten fixed to the wall. Previously check longitudinal and transverse leveling. The distribution of the battens will be parallel and in the opposite direction to the direction of the panels. The minimum recommended batten depth will be 30 mm. Other uses These decorative wooden panels allow their application, in addition to any surface such as walls or ceilings, in other types such as: Furniture coverings Coating of “cold” concrete-type areas. Headboards Separators Counters Doors etc. WOOD FALSE CEILINGS More information Acoustic panels More information Wood slats More information Technical doors More information Sport furniture More information TELL US WHAT DO YOU NEED TELL US ABOUT YOUR PROJECT We stand up to every challenge, more than 500 projects a year guarantee our success link PRESCRIPTION CATALOGUE FIEBDC / BC3 technical catalog, in PRESTO and PRESTO on-line format link DOCUMENTATION CENTER Catalogues, datasheets, and the tech documents you may need. link REQUEST YOUR BUDGET A detailed quote in less than 48 hours. link
Read More
SPIGO GROUP Soluciones en madera - Línea line Spigoline

spigoline

By
WIDE AND VERSATILE RANGE OF SOLID WOOD CLADDING SLAMS FOR WALLS AND CEILINGS THAT OFFERS A WARM, NATURAL AND CONTEMPORARY STYLE. Versatility in ceiling and wall coverings.Long durability indoors and outdoorsAdaptable to concave, convex and corrugated surfacesApplication in vertical, horizontal and even inclined positionsCreate warm, natural and noble environments.Optimal for large public spacesExcellent sound absorption and reduction of reververation with the ACOUSTIC system spigoline WOOD SLATS Made by hands with more than 30 years of experience in the application of wood for technical coatings. Wood occupies a place of honor among the warm materials used to cover ceilings and walls. Its warmth as a material makes it optimal for large spaces where a large number of people gather. Download Catalog Below you can download the sheets of the different models GRID SYSTEM See files ACOUSTIC SYSTEM See files LINEAL SYSTEM See files PET SYSTEM See files CHARACTERISTICS OF SPIGOLINE Finishes Natural Ayous. Ayous + Dyed in wood (Beech, Oak, Cherry, Maple, Wengué) Ayous + Lacquer RAL/NCR. Superior panel for Acoustic System: M.D.F. painted in black with ovoid/groove or circular holes. Standard measurements GRID System Standard length of slats: 1500/3000 mm. ACOUSTIC System Standard length of slats: 2400 mm. Installation accesories GRID system: Installation in ceilings: On T-15 structure, Grid System with U-shaped clamp iron. Installation in walls: U-shaped clamp on rod, fixed to a wooden spacer. ACOUSTIC system: Installation in ceilings and walls with wooden spacer and fixing screw. Installation machining Areas of application Concert Halls Auditorium Theatres Conference Halls Offices Classrooms Nurseries Recording studio Churches Public buildings Airports Hotels Universities Shopping centres Cultural centres Cinemas Hospitals Restaurants Banks Radio studio TV studio Libraries Projects spigoline Sagasta High School New EFEBÉ offices Caja Rural de Navarra Patrocinio Winery San Nicolás Gastronomic Society Medical Association of Alava Montepino Questions frequent What are wooden slats? The wooden slats used in interior design and decoration are solid wood slats placed in parallel, specially designed and manufactured to achieve modern and elegant visual results and, at the same time, guarantee a fast, comfortable, and safe assembly. They are used as interior cladding for walls and ceilings in homes, offices, business headquarters and all types of buildings. They usually have an aesthetic and decorative function, although many models in the Spigoline range from Spigogroup can also offer acoustic absorption features, to ensure good acoustic comfort in the installation room. How to install wooden slats? The panels of the Spigoline range are delivered fully assembled, so that the alignment of the wooden slats is guaranteed. The assembly system also provides solutions to ensure that the panels fit together. In this way, the Spigoline range allows a quick and safe installation on ceilings and walls, which guarantees that the result will preserve the desired visual rhythm in the spacing and parallelism of the wooden slats. The Spigoline Grid System consists of panels of solid wood slats, with square or rectangular sections, placed parallel to each other, joined by means of black wooden rods 12 mm in diameter. This system allows it to be installed on walls with fast and efficient anchoring, based on the placement of the panels through clamps screwed onto wooden battens. In false ceilings, it is installed with an anchoring system based on the placement of the grids through a structure of T-15 profile bars and fastening clips that serve as hooks. The Spigoline Grid System can be accompanied by sound-absorbing material to incorporate acoustic absorption. The Spigoline Acoustic System consists of a plywood board, with oblong or circular perforations, with solid wood slats of square or rectangular sections, placed parallel to each other. For installation, both on walls and ceilings, the panels are fastened to wooden battens with lag screws. Like Spigoline Grid, the Spigoline Acoustic system can be accompanied by sound absorbing material to incorporate controlled acoustic absorption. There are other variants of the Spigoline system, and in some cases, we can offer bespoke solutions – feel free to consult us with your requirements to find out what we can do for you. What are the advantages of wooden slats? The main advantage of wooden slats is that they can transform the perception that a user has of a space. Opting for the installation of wooden slats in a project brings verticality, order, serenity, and seriousness, conveying the feeling of being in a place where balance and harmony prevail. For this reason, they are increasingly used in hotels, offices, business headquarters and professional offices. The solid wood we use in our Spigoline range comes from sustainable sources and can be PEFC and FSC certified, being materials that can help in a sustainable project, or that will be LEED or BREEAM certified. Our products are certified for low volatile organic compound (VOC) emissions, so they help you to enjoy good air quality and a healthy environment. Finally, solid wood offers warmth and harmony with nature, and creates a greater sense of closeness between people working in an office, with clients or with collaborators who visit them. What wood are they made of? In the panels of the Spigoline range, the decorative wooden slats are made of solid ayous wood. This wood, originally from the western forests of central Africa, has as its main characteristic its low density (390 kg per cbm). This makes it very light and ideal for use in false ceilings and wooden ceilings. In addition, its machining is very simple, it does not splinter and is very easy to handle during installation, which guarantees perfect and long-lasting final assembly results. Ayous wood has an original yellowish white colour that allows, by means of staining, to achieve the hue that any decoration and interior design project demands. The Spigoline wood slats catalogue offers natural ayous finishes; oak, beech, maple, cherry, wenge stained ayous; or matt lacquered ayous in the solid RAL/NCR colour of your choice. In some cases, we can also manufacture with other wood species, such as pine, oak, or beech: consult us if your project requires it. All the wooden slats manufactured by Spigoline come from regulated and sustainable plantations that guarantee an environmentally friendly origin. They can be supplied PEFC or FSC certified according to your needs. In what format are the wooden slats sold? Our wooden slat panels, which are delivered fully assembled, can be of different widths and lengths, which combine with different options in terms of number of slats per grill, slat width, slat height or slat spacing. The technical data sheets of each product contain precise information on the dimensions, depending on the model. The Spigoline Grid system offers us panels of 1,500 or 3,000 mm long and 340, 350 or 360 mm wide, as shown in the technical data sheet of each model. We can choose between 4, 5, 6 or 8 slats per grid, slats of 15 or 30 mm wide, 35 or 70 mm high and a separation between slats of 30 or 55 mm. The Spigoline Acoustic system offers panels 2,400 mm long and 600 mm wide, and allows us to choose between 4 or 8 slats per grid, slats 20 mm wide, 50 or 90 mm high and a separation between slats of 55 or 130 mm. As for fire reaction, in all cases we can choose between a treatment with fireproof varnish with classification B-s2, d0 according to UNE-EN 1350-1:02, or a treatment of spraying and immersion in autoclave for the fireproofing of the ayous wood itself with classification B-s1, d0, with subsequent application of fireproof varnish B-s2, d0. Finally, we have options for the installation of our Spigoline panels outdoors or in high humidity environments. Do not hesitate to contact us if your project has special needs. Is it possible to choose the dimensions of the slats to measure? Yes, since we manufacture to order, it is often possible to manufacture Spigoline panels with wooden slats in custom dimensions and spacing, or even in wood species of your choice. The maximum slat dimensions for our Spigoline Grid panels are 120×30 mm. However, if you choose a product from our standard Spigoline catalogue, you will have the advantage of very short production times, between 3 and 8 weeks for most orders. Do not hesitate to contact us if you have a project that requires special slat sizes. How can I integrate lighting into Spigoline wooden slat systems? There are several options for integrating luminaires into Spigoline product installations. The simplest, in false ceiling installations, is to use Spigoline Grid panels with sufficient spacing for the luminaires to fit between the slats, and to use separate suspensions for the luminaires – avoiding placing the weight of the luminaires on the profile grid bar system. Do not hesitate to contact us for other options. Is it possible to access installations in the floor slab with a Spigoline panel ceiling? The Spigoline Grid range consists of panels that are very light and easy to dismantle. Two people can dismantle and reassemble a Spigoline Grid panel in just a few minutes, allowing relatively easy access to any ceiling slab installations (electrical, HVAC, piping…). If your project requires very frequent access to the slab (such as access trap doors), do not hesitate to consult us for other options. Can I integrate air conditioning outlets with Spigoline? The solid wood products in the Spigoline Grid range have a large open area, usually more than 50%. In some cases, it is possible to place ventilation or air conditioning outlets above our panels. We are available to advise you with this or any other question. WOOD FALSE CEILINGS More information Acoustic panels More information Decorative wood panels More information Technical doors More information Sport furniture More information TELL US WHAT DO YOU NEED TELL US ABOUT YOUR PROJECT We stand up to every challenge, more than 500 projects a year guarantee our success link PRESCRIPTION CATALOGUE FIEBDC / BC3 technical catalog, in PRESTO and PRESTO on-line format link DOCUMENTATION CENTER Catalogues, datasheets, and the tech documents you may need. link REQUEST YOUR BUDGET A detailed quote in less than 48 hours. link
Read More
SPIGO GROUP Soluciones en madera - Línea acustic Spigoacustic

spigotec

By
SPIGOTEC WOOD FALSE CEILINGS, WOOD CEILINGS AND WALL COVERINGS, IS SPECIALLY DESIGNED FOR ENCLOSED SPACES IN WHICH AESTHETICS AND ACOUSTIC CONDITIONING ARE EARMARKED ASTHEIR BEST ATTRIBUTES. Acoustic AbsorptionDamp-proofVaried lookEasy cleaningImpact-resistantFire-resistantAble to be dismantled spigotec WOOD FALSE CEILINGS The wood has a place of honour between warm materials which are used to cover ceilings and walls. The warmth of this material becomes in optimum to big spaces, where a large number of people is gathered. In this way, it manages to exploit wood up to its most technical capacity, in places including public venues, offices, theatres, auditoriums, hospitals… Thanks to different finishes and perforations possibilities in the panels, Spigogroup is capable to offer a wide and varied range of high quality models. Download Catalog Below you can download the sheets of the different models MODEL WITHOUT PERFORATIONS See files CIRCULAR PERFORATION MODELS See files GROOVED/OVOID PERFORATION MODELS See files SQUARED PERFORATION MODELS See files MICROPERFORATED MODELS See files SPECIAL MODELS See files CHARACTERISTICS OF OUR FALSE WOOD CEILINGS Finishes Supports Types of perforations Standard measurements Ceiling measurements 600 x 600 mm 1200 x 600 mm 1200 x 300 mm Wall covering measurements 2400 x 600 mm 2400 x 300 mm 1200 x 600 mm Accessories Installation machining Areas of application Concert Halls Auditorium Theatres Conference Halls Offices Classrooms Nurseries Recording studio Churches Public buildings Airports Hotels Universities Shopping centres Cultural centres Cinemas Hospitals Restaurants Banks Radio studio Libraries Cultural centres Projects spigotec Jamones Volatín Vivanco Museum The Sacred Auditorium University Square Stratford Tracasa Questions frequent What is a false wooden ceiling? The false wooden ceiling, or suspended ceiling, is a constructive element that is installed by means of a system of T-grids at a certain distance from the original slab or ceiling, for technical or aesthetic reasons, and that, sometimes, also offers a free space called plénum. Characteristics of wooden false ceilings One of the main characteristics of wooden suspended ceilings is that they can be assembled or disassembled relatively easily. Depending on how quickly this operation can be carried out, we distinguish between demountable suspended ceilings and inspectable suspended ceilings. The removable wooden false ceilings can be installed easily and quickly but, in some cases, do not allow quick access to the ceiling slab installations (piping, electrical, HVAC…) for inspection at all points. Once installed we can disassemble it again, but always starting with the side areas that will be the best access to begin the removal of the material. However, suspended ceilings may allow direct access to a specific point of the installation without the need to dismantle it in its entirety, and thus be able to repair or replace some of its panels, or access ceiling slab installations, without affecting the rest of the false ceiling. Reasons to install a false wooden ceiling There are several main reasons to install a false wooden ceiling. On the one hand, the aesthetics of the space in which they are placed. The false ceiling covers the original ceiling slab, concealing irregularities in the construction and hiding materials or installations thay may be visually unacceptable to any user (piping, electrical, HVAC…). Including a false ceiling with perforation and controlled acoustic absorption allows to obtain rooms with a lower reverberation time, and therefore a higher acoustic comfort. In some countries, it is mandatory to comply with regulations regarding the reverberation time of a room, and a false ceiling with acoustic absorption can help to comply. On the other hand, technically speaking, a false ceiling can house a multitude of elements such as light fittings, air outlets, smoke detectors and fire water outlets, sensors and security cameras, as well as keeping the corresponding ducts, pipes and cables hidden. There is a final reason, which is to save on air conditioning and care for the environment. A false ceiling lowers the ceiling height and reduces the volume of air to be heated or cooled, reducing the energy bill of a building and helping reduce its carbon footprint. Benefits of wooden false ceilings The benefits of wooden false ceilings are many and that is why its use is so widespread. Aesthetically, wooden false ceilings provide warmth and elegance. The use of wood is also the most ecological and renewable option. And, when installed using sound-absorbing wooden panels, they also help to control reverberation and achieve good acoustics in a discreet and effective way. Another benefit is that they are easy to assemble, disassemble, repair, replace and maintain, making them the perfect ally for the rest of the building’s installations (air conditioning, security, connectivity, etc.). They are also highly resistant to impact and humidity, and can offer an excellent reaction to fire. What are the advantages of Spigogroup's wooden false ceilings? The false ceilings manufactured by Spigogroup are designed to improve the acoustics of a room while providing a very elegant aesthetic solution that can be adapted to any decorative style. For this, the catalogue offers hundreds of coating options with different degrees of acoustic absorption, which can be combined with a wide variety of finishes in natural wood, melamine, lacquered or HPL. In addition, Spigogroup’s wooden false ceilings have different assembly systems, all very simple in their execution. Finally, Spigogroup wooden false ceilings are manufactured in Spigogroup’s own facilities in Europe, and are certified ISO 9001, 14001, PEFC, FSC, in terms of reaction to fire and in terms of formaldehyde emission and volatile organic compounds (VOC – air quality). This allows Spigogroup to manufacture made-to-measure and to take on special orders according to the characteristics of each project, with accredited guarantees of service, quality, compliance with regulations, delivery times and reliability. What type of wood is used for good acoustic conditioning? The acoustic panels with which Spigogroup wooden false ceilings are installed are manufactured with an MDF or medium density fibreboard base, which is very easy to cut and machine and does not produce splinters. This MDF base can be standard or can have a special fireproof or waterproof treatment, depending on the place where they will finally be installed. The MDF base board can be finished in melamine, varnished natural wood, lacquered or high density laminate (HPL), according to aesthetic needs. Is it easy to mount a false wooden ceiling? Whether you opt for a Spigotec wooden suspended ceiling or a Spigoacustic wooden suspended ceiling, the installation methods are standard in the interior cladding industry, and any experienced team will be able to do the job. Spigoacustic suspended ceilings can be installed with a choice of T-15 concealed profile, T-15/T-24 semi-concealed profile or T-24 concealed profile + clamp. Spigotec suspended ceilings can be installed with a choice of exposed profile, concealed profile T-24, semi-exposed profile T-15/T-24 or fineline profile T-15. How long does it take to install a false wooden ceiling? It will depend on the model and installation system chosen, the size of the wooden ceiling or false ceiling and the experience of the fitter. Spigogroup, as a company with ISO 9001 certified management and production systems, is proud of its agility in manufacturing, speed and commitment to material delivery times, ease of installation. Our team strives to provide with the customer support you need for your project – don’t hesitate to contact us for a precise, reliable time frame and quotation. Acoustic panels More information Wood slats More information Decorative wood panels More information Technical doors More information Sport furniture More information TELL US WHAT DO YOU NEED TELL US ABOUT YOUR PROJECT We stand up to every challenge, more than 500 projects a year guarantee our success link PRESCRIPTION CATALOGUE FIEBDC / BC3 technical catalog, in PRESTO and PRESTO on-line format link DOCUMENTATION CENTER Catalogues, datasheets, and the tech documents you may need. link REQUEST YOUR BUDGET A detailed quote in less than 48 hours. link
Read More